Follow

How to connect Cyclus 2 in Desktop 3.X.X

Cyclus ergometers are connected with computer through ethernet cable. Besides that Cyclus offers also possibility of connection through WiFi. Choose what type of connection has your ergometer.

  • Ethernet port
  • WiFi

Informace: You will need a cable specified further for connection. If you have bought a box version of UniVET Systém, required cable is included in the package (except serial cable). Online version package contains only software license. Accessories has to be bougth additionally. All types of cables needed are usually available in shops with electronics.

Ethernet port (RJ45)

You will need an ordinary ethernet cable for connection. Connect the ergometer to the network using ethernet cable. Ethernet port, type RJ45, is located at the lower side of control panel of your device. Computer is connected with the trainer after connecting it to the network. Now proceed to settings of UniVET System. Continue as follows:

  • Plug ergometer in electricity.
  • DHCP system automatically assigns a unique IP address to the ergometer. You have to find it out and enter it to UniVET System.
  • Continue as follows:
    1. Plug Cyclus2 device in electricity and local network and launch it.
    2. Go to „System“ in the main menu (use arrows) and confirm by OK button.
    3. Go to the last item „Information“ and confirm by OK button.
    4. Find IP address in Information window and note it

cyclus_obr1.jpg

    1. Launch UniVET System on your computer and go to Settings -> Device Manager in the main menu.

ant1.jpg

    1. Choose section „CYCLUS2“Tick off the field „Enable searching of Cyclus2 devices“
    2. Set IP address of the ergometer on the value you have assigned to it in the previous step.
    3. Press the button „Add IP address“. Address will display in the lower field. UniVET System can detect your device from this moment.

cyclus_obr5_en.jpg

Connection is done. We wish you a pleasant training!

WiFi

Computer detects the device and assigns IP address to it automatically. Computer is connected with the device from this moment. Now proceed to settings of UniVET System. Continue as follows:

  • Plug ergometer in electricity.
  • WiFi connection is usually allowed. Alternatively use help of Cyclus2 device and activate WiFi.
  • DHCP system automatically assigns a unique IP address to the ergometer. You have to find it out and enter it to UniVET System.
  • Continue as follows:
    1. Plug Cyclus2 device in electricity and local network and launch it.
    2. Go to „System“ in the main menu (use arrows) and confirm by OK button.
    3. Go to the last item „Information“ and confirm by OK button.
    4. Find IP address in Information window and note it

      cyclus_obr1.jpg

    5. Launch UniVET System on your computer and go to Settings -> Device Manager in the main menu.

      ant1.jpg

    6. Choose section „CYCLUS2“
    7. Tick off the field „Enable searching of Cyclus2 devices“
    8. Set IP address of the ergometer on the value you have assigned to it in the previous step.
    9. Press the button „Add IP address“. Address will display in the lower field. UniVET System can detect your device from this moment.

cyclus_obr5_en.jpg


Connection is done. We wish you a pleasant training!

Description of control program during the indoor training

cyclus2_tlacitkade.png

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.